SUMIDA: Product News

SMD Metal Inductor for Automotive Applications: CDMC60D28/T150

April 17th 2018

Sumida has developed a metal SMD power inductor CDMC60D28/T150. The size of 6x6mm type is the first release in CDMC**D**/T150 series, and the size of 5x5mm, 8x8mm & 10x10mm are under development. CDMC60D28/T150 can be used in LED head lighting, ECU and other automotive high reliability applications (Inductance range: 0.1uH ~ 10uH).

Key Features:

  • AEC-Q200 qualified
  • Metal Compound Molding Type
  • Operational Temperature range: -55°C ~ +150°C (including self-heating)


Applications:

LED head lighting, ECU & other high reliability automotive applications

 

Parts List:

Part Name Inductance (μH) (±20%) ※1

D.C.R. (mΩ) (±10%)

Saturation Current (A) ※2

Temperature Rise Currrent
(A) ※3
at 20℃ at 110℃ at 150℃
CDMC60D28T150NP-R10MC 0.10±20% 1.70 80.0 79.0 78.0 26.0
CDMC60D28T150NP-R15MC 0.15±20% 2.20 73.0  71.0 70.0 21.3
CDMC60D28T150NP-R22MC 0.22±20% 2.80 57.0 56.5 56.0 19.0
 CDMC60D28T150NP-R33MC 0.33±20% 3.60 43.5 43.0 42.5 16.6
 CDMC60D28T150NP-R47MC 0.47±20% 4.40 36.5 36.0 35.8 15.1
 CDMC60D28T150NP-R68MC 0.68±20% 6.30 30.5 30.0 29.5 12.9
CDMC60D28T150NP-R82MC 0.82±20% 7.20 28.0 27.8 27.5 11.5
CDMC60D28T150NP-1R0MC 1.0±20% 9.00 24.0 23.8 23.5 10.6
CDMC60D28T150NP-1R5MC 1.5±20% 16.3 23.0 22.8 22.5 7.6
CDMC60D28T150NP-2R2MC 2.2±20% 24.9 19.0 18.5 18.0 6.2
 CDMC60D28T150NP-3R3MC 3.3±20% 33.1 16.6 16.4 16.2 5.4
 CDMC60D28T150NP-4R7MC 4.7±20% 45.9 11.1 11.0 10.9 4.4
CDMC60D28T150NP-6R8MC 6.8±20% 73.4 9.3 9.2 9.1 3.5
 CDMC60D28T150NP-8R2MC 8.2±20% 86.9 9.8 9.7 9.6 3.3
CDMC60D28T150NP-100MC 10.0±20% 102.3 9.3 9.2 9.1 3.0

※1 Measuring frequency at 100kHz, 0.1V.
※2 Saturation current: This indicates the actual value of D.C. current when the inductance becomes 20%lower than its initial value.
※3 Temperature rise current: The actualvalue of D.C, current when the temperature of coil becomes ⊿T=40℃. (Ta=20℃)

Note: Please note that when using the product while applying current with audio-frequency (AF) signals may results in audible noises due to magnetostriction. Also, in order to avoid an audible noise problem, operating with non-AF signals would be recommended. The noise amplify depending on the coil mount area on the PCB.

Production Stage:

SOP: May 2018

Please click here to view product details.